The Gemini 3D unoriented label and print inspection system uses three-dimensional virtual imaging technology that provides a single, 360°, unwrapped inspection image, the Gemini 3D is designed to detect label defects after the labeler including defects that are caused by handling before the adhesive is set. The Gemini 3D also detects print defects either on pre-printed labels or on labeling printed directly onto the container.

The Emhart Inex Gemini 3D is NEMA 4X-rated and is designed for use in harsh, wet environments.

NOTE: Specifications are subject to change. Actual performance depends on specific application, container size, and line speed.

Types of Labels Inspected

• Cold-glued paper labels
• Plastic, self-adhesive labels
• Heat-shrink labels
• Full body sleeve labeling
• Silkscreen print directly on container
• Wrap-around labels
  

Inspections/Defects detected

• Label presence
• Vertical position
• Horizontal position (wrap/registration)
• Angle (skew)
• Correct label
• Quality defects (flags, tears, wrinkles)
• Cap/capsule presence (height, correct cap/capsule)
• Under-fill
• Missing codes or tamper bands

Maximum diameter: 183 mm [7-3/16 in.] (standard); 127 mm [5 in.] (with high-speed option)
Maximum height: 356 mm [14 in.] (standard); 248 mm [9-3/4 in.] (with high-speed option)

Maximum speed: 600 bpm (standard); 850 bpm (with high-speed option).
Actual machine speed can be affected by container handling and inspection setup.

User interface: Windows®-based, pendant-mounted touch-screen display